Delphin CODER Bitealarm Set

Delphin CODER Bitealarm Set

Delphin CODER is a bite alarm set with a receiver that offers an ideal price-to-performance ratio. Its main advantages are reliability and 100% functionality, comparable to more expensive sets. The signal between the alarm and the receiver can be transmitted up to 140 meters under ideal conditions. The entire set is delivered in a hard plastic case that ensures the safety of the equipment during transport.

The alarm is powered by a 1x12V LR23A battery, which has a sufficiently long lifespan. In case of low battery level, an indicator will alert you with a short sound signal. Use the "V" switch to select one of 5 volume levels, including a silent mode. It is also possible to select the desired tone and sensitivity level (ranging from 1-9 cm), which also has 5 different levels. An unquestionable advantage of the CODER set alarms is the ability to choose from 7 LED indicator colors. Everyone can choose their favorite, and if you want to change it, you can simply select another color according to the instructions. A different sound will notify you of a bite, and the LED will light up for 15 seconds after each bite. There is a 2.5 mm jack socket at the bottom. It is also possible to activate the night fishing position LED.

The receiver reliably signals a bite with sound, light, and if the lever is set to the appropriate position, also with vibrations. Using the "V" switch, you can select one of 5 volume levels, including a silent mode, and using the switch marked "T," you can select the desired tone. The receiver has four colored LED indicators that light up continuously for 15 seconds after a bite. It is powered by a 1x9V battery. When its lifespan is ending, it will be signaled by a continuous short sound. The receiver, like the alarms, stores all selected settings.

For this set, a maximum configuration of 3 + 1 (3 alarms and one receiver) can be saved.

The average battery life is 100 hours of continuous operation. Environmental factors and the age and condition of the battery may affect this value.

The Delphin CODER set can be paired with the LightCONTACT lamp.

Batteries not included.

WARNING! On the CODER set receiver, it is possible to turn off and then turn on individual LEDs, as shown in the video "Turning LEDs On/Off." The LED can be turned off when turning on the receiver by holding the "P" button for 2 seconds and then pressing it briefly. The LED can be turned back on in the same way. Individual LEDs can be switched between by holding the "P" button for 2 seconds without further short pressing.

RECEIVER / functions:
- 5 volume levels (V-button, including silent mode)
- 5 different signal tones (T-button)
- Vibration mode (switch - right position)
- 4 colored signal LEDs
- Memory of selected settings
- Two-position switch ON / OFF / VIBRATION
- Memory LED - lights continuously for 15 sec. after a bite
- Low battery indicator (continuous signal)
- Set test mode
- Range of 140m depending on terrain
- Powered by 1x9V battery

ALARM / functions:
- Waterproof
- 5 volume levels (V-button, including silent mode)
- 5 different signal tones
- 5 sensitivity levels (S-button)
- 7 possible LED colors
- Memory of selected settings
- Backbite signal - different tone
- Memory LED - lights continuously for 15 sec. after a bite
- Low battery indicator with short sound signal
- Night position LED
- Non-slip rod bed
- 2.5 mm jack socket
- Powered by 1x12V (type LR23A)

Tag: Alarm, Alarms, Bite, Bitealarm, CODER, Delphin, Indicator, Receiver, Set, Sets, with