Delphin MagHOLD - Magnetic Rod Holder
Delphin MagHOLD – magnetic EVA rod holder / Delphin





| Producent: Delphin | |
| Recommend this product to your friends: | Log in and refer » |
Delphin MagHOLD – magnetic rod holder
Delphin MagHOLD is a magnetic rod holder that allows you to safely set down your rod while preparing your fishing spot, assembling your rig, or organizing your gear by the car. Soft EVA foam, two strong neodymium magnets, and large cutouts for blanks ensure the holder protects the rod well and can be quickly attached to any metal surface.
Practical rod holder for setting down your rod
Delphin MagHOLD eliminates the need to lay your rod on the ground, lean it against bushes, branches, or random elements of your fishing spot. This simple accessory is useful when unpacking gear, assembling rigs, preparing Boilies, or temporarily setting down your rod by the car.
The holder features two large cutouts that also fit blanks with a larger diameter. This allows you to comfortably rest your rod without the risk of accidental contact with hard surfaces.
Mounting with neodymium magnets
The mounting system is based on two strong neodymium magnets embedded directly in the EVA foam. This allows you to attach the holder to your car body, metal racks, trailers, or other magnetic surfaces.
Installation requires no screws, straps, or additional tools. Simply place the holder on a suitable metal surface and it’s ready to use immediately.
Soft EVA foam for blank protection
The holder’s body is made of soft EVA foam, which is safe for your rod blank. The material reduces the risk of scratches and cushions the contact between the rod and the holder.
The side that contacts the mounting surface is also covered with a soft foam layer. This helps minimize the risk of paint damage, provided both the surface and the holder are clean before use.
Why this model stands out among other rod holders
Delphin MagHOLD stands out with its quick magnetic mounting, soft EVA construction, and two large cutouts for blanks. It’s a small but very practical accessory for anglers who want to protect their rods during preparations by the water and avoid placing them directly on the ground.
NOTE: Important usage guidelines
Before attaching the holder to your car body, thoroughly clean the mounting area and the holder itself from dust, sand, and other debris. Mounting to the vehicle is at your own risk, so it is especially important to avoid sliding the holder across the painted surface.
Who and in what conditions Delphin MagHOLD works best for
- For anglers preparing gear by the car.
- For temporarily setting down the rod while assembling rigs.
- To protect the blank from contact with the ground and hard surfaces.
- For mounting on car bodies, racks, and other metal surfaces.
- Suitable for carp, feeder, spinning, and recreational fishing.
- For those looking for a small, easy-to-use organizational accessory.
Product specifications:
- Designed as a magnetic rod holder.
- Intended for temporarily setting down the rod while preparing your fishing spot.
- Equipped with two strong neodymium magnets.
- Allows mounting on magnetic metal surfaces.
- Made of soft EVA foam.
- Gentle on the rod blank.
- Features two large cutouts for rods.
- Also suitable for blanks with larger diameters.
- The side contacting the mounting surface is covered with soft foam.
- Helps reduce the risk of surface damage when used properly.
- No tools required for mounting.
- Requires cleaning of the mounting surface and holder before use.
Technical specifications:
| Parameter | Value |
|---|---|
| Product type | Magnetic rod holder |
| Brand | Delphin |
| Model | MagHOLD |
| Material | EVA foam |
| Mounting system | 2 neodymium magnets |
| Number of rod cutouts | 2 |
| Mounting surfaces | Metal surfaces |
| Dimensions | 10 x 6 x 2 cm |
| Application | Temporary rod setting during gear preparation |
Want to stay up to date with new products and news from the fishing world?
Add Rockworld-carpshop.com to your preferred sources in Google!
The operator of the online store reserves the right to temporary unavailability of the offered goods in the quantity, color, or size requested by the Customer.
There are no reviews for this product.
ask about Delphin MagHOLD - Magnetic Rod Holder
Enter your email address to receive updates about any changes in price, availability, and product description. You will also be notified about product promotions or when the product is listed in an auction.