Gardner Glo Pro

Gardner Glo Pro

Illuminate your fishing strategy with the Gardner Glo Pro liquid marker. It solidifies within seconds, and once charged with a UV torch, it glows brightly! You can also use a regular flashlight with a strong beam to charge it – the glowing effect will be shorter and less intense.

Application is incredibly simple:

1. Cast your rig to the baited area, and set up your rod as you usually do.
2. Apply a small amount of the substance between the reel and the first guide (or between the first and second guides) to coat the line over a length of 5-10 cm.
3. Wait a few seconds for it to set – and it’s ready.
4. Before the next cast, remove the rod from the rod pod, open the bail arm, and reel out enough line so that the marker on the line is just beyond the tip guide – approximately 30-90 cm from it.
5. Clip the line onto the spool clip and wind the rig back up.
6. Change the rig or bait and, standing close to the rod pod (where your rod will be positioned), cast your rig – hold your rod slightly elevated to cushion the line length limited by the clip.
7. Place the rod back on the rod pod and tighten the setup – the marker should be at a similar distance from the reel as when you marked it.

Available colors: green, yellow, pink, orange

Tag: gardner