Gardner GLO PRO 2G

Gardner GLO PRO 2G Glowing Marker

A glowing liquid marker. Shines brighter and longer than the original Glo Pro. It sets in seconds and after being charged with a UV torch, it glows! You can also use a regular torch with a strong beam to charge it - the glowing effect will be shorter and less intense.

Usage is very simple:

1. cast your rig into the baited spot, set up your rod as you usually do
2. apply a small amount of the substance between the reel and the first (or between the first and second) guide so that it coats the line over a length of 5-10 cm
3. wait a few seconds - and it's ready
4. before recasting, remove the rod from the rest, open the bail arm and pull out enough line so that the marker on the line is beyond the tip guide - about 30-90 cm
5. clip the line to the clip (on the spool) and wind up the rig
6. change the rig or bait and while standing close to the rest (where the rod will be placed), cast your rig - hold the rod slightly elevated to cushion the restriction of the line length clipped to the spool
7. put the rod back on the rest and tighten the setup - the marker should be at a similar distance from the reel as when you marked it

Available colors: green, blue, orange, yellow

Price per one piece.

Tag: gardner