Gardner Glo Pro Plus

Gardner Glo Pro Plus

Longer and brighter glow than Glo Pro. It sets in a matter of seconds and after exposure to UV light, it glows! You can also use a regular flashlight with a strong beam to illuminate it - the glowing effect will be shorter and less intense.

Application is very simple:

1. cast your rig to the baited spot, set up your rod as you usually do
2. apply a small amount of the substance between the reel and the first (or between the first and the second) guide so that it surrounds the line for a length of 5-10 cm
3. wait a few seconds - and it's ready
4. before casting the rig again - remove the rod from the holder, open the bail arm and pull out enough line so that the marker on the line is outside the tip guide - about 30 -90 cm.
5. clip the line to the clip (on the spool) and fold the rig
6. change the rig or bait and, standing close to the holder (where the rod will be), cast your rig - hold the rod slightly raised to cushion the limitation of the line length clipped to the clip
7. place the rod back on the holder and tighten the rig - the marker should be at a similar distance from the reel as you marked it.

Available color: fluorescent - greenish

Tag: gardner